+86-18954236141
gnd_sales@163.com
English English
Home > News > Industry News
Industry News

Daily protection of shot blasting machine accessories

2022-06-11
When people use the shot blasting machine, if they do not often check the use of the shot blasting machine accessories, it will lead to excessive wear and tear of the accessories, resulting in mechanical failure, which will bring great losses to the enterprise. This requires the necessary daily routine for the shot blasting machine. Protection is, but how to protect has become a problem that troubles everyone. After all, the shot blasting machine has many vulnerable parts and small parts. The pass-through shot blasting machine has sorted out some daily protection techniques for you to extend the service life of the shot blasting machine, and shared with you:
Daily protection of shot blasting machine accessories:
1. Check whether there are sundries falling into the machine, and remove them in time to prevent the blockage of each conveying link and cause equipment failure.
2. Before the shot blasting machine manufacturer operates, check whether the screws of the shot blasting machine accessories are tightened.
3. Before working, check the wear of the wearing parts such as guard plates, blades, impellers, rubber curtains, directional sleeves, rollers, etc. twice every shift, and replace them in time.
4. Check the coordination of the moving parts of the electrical appliance, check whether the bolt connection is loose, and tighten it in time.
5. The oil filling point of the shot blasting machine equipment regularly checks whether the oil filling of the spare part meets the regulations.
Generally speaking, the wearing parts and wear-resistant parts of shot blasting machine are made of high-chromium wear-resistant cast iron. In terms of service life, the service life of the blade is more than 500 hours, the service life of the side plate and the top plate is at least 800 hours, the service life of the end plate is 1200 hours, the service life of the directional sleeve pelletizing wheel is 1800 hours, and the service life of the main engine room is 1800 hours. There is no problem with the protective plate of the shot blasting machine within a year, some shot blasting machine equipment is still in good condition even after more than 2 years of use, and some shot blasting machine parts are severely worn after 3 or 4 months of use.



Previous:

Roller conveyors Shot Blasting Machine Sent to USA

Next:

Shot blasting machine introduction
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept